Our Product & Design Produce by International Standard
Our brand as ” Clever Lab”
We produce design and install the fume hood under the international standard as the following :
Our Fume Hood Classify By The Following
A fume hood is a high-performance unit for use in various labs. The design incorporates an automatic by-pass to eliminate high face velocities—design and installation accordance with international standards. Fume hoods are available in 4 sizes 1200mm, 1500mm. 1800mm, and 2000mm. We also provide different types of Fume Hood material construction, including Fiber Glass, and Epoxy coated Steel and Stainless Steel
Fume Hood Structure Type
Fiberglass
Epoxy Coated Steel
Stainless Steel
Fume Hood Classify by Air Flow Type
Our Design & Size
Conventional
Air Flow Type
Our Product
Our Design & Size
By-Pass
Auxiliary Air Fow Type
Our Product
Fume Hood Functional
Fume hood (FUME HOOD) ready-made KNOCK DOWN SYSTEM 100% for hood, acid vapor and chemicals that is toxic in scientific practice is an AUTOMATIC BYPASS SYSTEM type.
The size of the cabinet is divided into 2 parts as follows:
The upper part is used for testing.
– Size 1200 x 850 x 1500 mm. (Width x Depth x Height)
The lower part is used to store equipment.
– Size 1200 x 850 x 850 mm (Width x Depth x Height)
Fume hood structure (Selected Material as of your requirement -Fiberglass, epoxy powder-coated steel, and stainless steel)
The exterior is made of fiberglass (Fiberglass Reinforced Polyester) chemical resistant type or epoxy powder-coated steel or stainless steel. The interior walls are homogeneous, made of fiberglass grade Vinyl ester resin or polypropylene, with built-in paint that can be cleaned.
Fume hood door Sliding open (Sash) for work. It is 6 mm. thick tempered glass. The sliding handle frame is made of fiberglass that does not rust. Fastened with a plastic-covered sling to move up and down vertically, a pulley is a ball bearing type embedded in a Rigid nylon rod and can be stopped at any distance as needed. with a pendulum as a counterweight
Inside the hood and control
Inside the fume hood, there is a square-shaped sink made of fiberglass with a gutter designed to slope towards the sink to prevent water droplets caused by condensation of the windpipes. Do not let it flow out to contaminate the work area. with odor and sediment trap (Bottle waste trap) made of Polypropylene
Other Functional
Analog Control
Analog Control panel only On and off operation
Optional : Digital Control
Option : Control panel in front of the cabinet to control operation within the cabinet With indicator light Various work
Temper Glass Sash Door
Tempered glass 6mm thickness sliding can be stopped at any time
SEAT
Blower
Case will be Injection Molded PE s Impellor will be Backward, high pressure type, Injection Molded PPs
Water Faucet
™Standards Type L copper tube will be used for clean water, air and gases
Gas Faucet
™Standards Type L copper tube will be used for clean water, air and gases
Bottle Trap & Basin
Water PP, PE will be used for Drain Lines. Glass Drain Line will be option request.
Warantee
1 Year Warantee
